SSC 3430 BTR(L), L-band Beacon Tracking Receiver (USED)

SSC Beacon Tracking Receiver 3430L
The SSC Beacon Tracking Receiver 3430L, -LD, -LF, and -LW are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier.
Frequency selection on 10kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50kHz facilitates accurate tracking at very low C/N levels.
The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form “C” relay contacts provide external Loss of Carrier Alarm. A front panel VFD displays operating frequency, relative signal level, carrier lock or alarm and input level.

Specifications
Input Frequency:
3430-L 950-1,800MHz
3430-LD 930-1,800MHz
3430-LF 930-2,050MHz
3430-LW 950-2,050MHz
Input Level -30 to -90dBm typical
Tracking Slope 0.5V/dB
Tracking Linearity 0.25dB
Frequency Selection 10kHz steps
Min. input level for Lock -110dBm
Input Connector Type “F” Female,75ohm
Threshold 4dB C/N for acquisition, < 1 dB C/N for carrier lock
Tracking Response 0 to +10VDC over 20dB input range
Alarms Form-C relay contacts
AFC ±25kHz
Noise Bandwidth 50kHz

Mechanical:
Output Connector Modular socket & plug
Dimensions 1RU, 19″x 16″x 1.75″

Power:
Prime Input Power 90-260VAC, 47-63Hz, auto-sensing, 45W max
LNB Power +24 Volts @ 1 Amp available on center conductor, Selectable In/Out

Data Sheet: SSC.3430-BTRL.Manual

For more information, please contact us at sales@ai-sat.com