COMTECH CDM-600 IF Satellite Modem (USED)

The CDM-600 are open network satellite modems, which are fully compliant with IESS-308, -309, -310, -314, and –315 from 64 kbps through T2 and E2.
They are available in the following three data rate ranges:
• Low-Rate variable: 2.4 kbps to 5.0 Mbps
• Mid-Rate variable: 2.4 kbps to 10.0 Mbps
• High-Rate variable: 2.4 kbps to 20.0 Mbps In addition, both modems operate in closed network from 2.4 kbps to 20 Mbps. The modems include T1, E1, T2, and E2 G.703 interfaces, in addition to EIA-422, V.35, EIA-232, and serial LVDS. HSSI is provided by adding the CIC-20 interface converter. The architecture is firmware and FPGA-based, and the internal Flash memory allows easy updating via the serial port. The modem offers exceptional flexibility and performance in a 1RU enclosure.

FEATURES
• CDM-600: 50 to 90 or 100 to 180 MHz IF range CDM-600L: 950 to 2000 MHz IF range
• Fast acquisition demodulator (± 32 kHz acquisition range, 64 kbps, Rate 1/2 QPSK: 1 sec average)
• BPSK, QPSK, OQPSK, 8-PSK, 16-QAM modulation types
• Patented 8-QAM for LDPC
• Data rate range from 2.4 kbps to 20 Mbps
• Forward Error Correction choices include Turbo Product Coding (IESS-315 compliant), Viterbi, Sequential, Reed-Solomon, LDPC and TCM
• Intermediate Data Rate (IDR)
• Intelsat Business Services
• D&I++
• ESC++
• Automatic Uplink Power Control (AUPC)
• Embedded Distant-end Monitor and Control (EDMAC)
• Asymmetric Loop Timing
• CDM-600: 50 or 75 , front panel selectable CDM-600L: Transmit 50 , Receive 50 or 75 , female Type N connector
• Open network compatible and backwards compatible with the CDM-500/CDM-550, and CDM-550T
• Interoperable with SDM-300A, SDM-300L3 (CDM-600L only)
• 1:1 and 1:10 redundancy switch available

Data Sheet: Comtech cdm600-600L
Manual: Comtech cdm-600-600L_3_manual

For more information, please contact us at sales@ai-sat.com