A satellite IRD receiver (integrated receiver decoder) takes a feed from the satellite, an IP network or an ASI link, demodulates and descrambles it, and decodes the video and audio to SDI or IP for the next step in the chain. Professional IRDs are modular and licensed per option, so two units with the same model number can do very different things. Below are the points that decide whether an IRD fits a specific feed, and what to ask before buying a used or refurbished unit.
1. Compression formats: MPEG-2, MPEG-4 AVC and HEVC
The receiver has to decode the format the uplink sends. Check each of these separately, because they are often licensed one by one:
- Codec: MPEG-2, MPEG-4 AVC (H.264) and HEVC (H.265). More and more contribution and distribution feeds move to HEVC, and an IRD without HEVC decoding cannot receive them.
- Chroma format: 4:2:0 is common for distribution, 4:2:2 for contribution feeds that are processed further at the broadcaster.
- Bit depth and resolution: 8 bit or 10 bit, SD, HD, 1080p50/60 and, where needed, UHD.
On some platforms HEVC decoding needs extra hardware as well as a licence. On the Ericsson RX8200, for example, HEVC decoding comes with an additional decoder module, so check that the module is fitted as well as licensed.
2. Satellite input: DVB-S, DVB-S2 and DVB-S2X
On the RF side, check the modulation standards, MODCODs and symbol rates the IRD supports against the parameters of the carrier. A receiver that handles DVB-S2 with QPSK and 8PSK may still need a licence for 16APSK or 32APSK, or for DVB-S2X. Also check:
- the number of L-band inputs and the input frequency range, usually 950 to 2150 MHz
- the maximum symbol rate per input; the RX8200 specification, for example, lists DVB-S2 up to 60 Msym/s on inputs 1 and 2
- LNB power and 22 kHz control, if the receiver feeds the LNB directly
3. IP and ASI inputs
More feeds now arrive over IP networks as well as satellite. An IRD with IP input can take a transport stream over IP, and some support SMPTE 2022-7 protection switching, where the receiver combines two identical streams over separate paths. ASI input is still used in many facilities to take streams from a demodulator, a multiplexer or a router.
4. Descrambling: BISS, BISS2 and BISS-CA
Most contribution feeds are scrambled with BISS. The modes differ in key length and key handling:
| Mode | Key | How it works |
|---|---|---|
| BISS-1 | 48 bit, DVB-CSA | A fixed session word is entered at encoder and receiver. |
| BISS-E | 48 bit (BISS) or 128 bit (BISS2) | The session word is encrypted with a receiver or user specific ID, so the key alone is not enough. |
| BISS2 | 128 bit, DVB-CISSA | The successor to BISS-1, with a longer key. |
| BISS-CA | BISS2 based | Conditional access mode in which the rights holder can grant and revoke access per receiver, without sending keys to each site. |
The technical specification of the feed states which mode is used. Rights holders that want to control access per receiver use BISS-CA. Check that the mode is licensed on the IRD as well as supported by the model. For feeds that use a commercial conditional access system, a Common Interface slot for a CAM may be needed instead.
5. Outputs and audio
- video outputs: HD-SDI or 3G-SDI, and IP transport stream output if the decoded stream or the received transport stream is passed on
- ASI output for passing the transport stream to other equipment
- audio: the number of audio pairs, embedded or discrete AES outputs, and whether Dolby formats are decoded or passed through
6. The licence sheet
Because most of these functions are software options, the licence list of the unit is the real specification. IRD listings on the AI-SAT website include a licence sheet reference in the product description where available, such as “Mediakind_RX8200_DVBS2X.Full.HEVC.BISS.CA”. Compare that list with the feed parameters: codec, chroma format, input standard, MODCODs and BISS mode. Also check the software version, since newer features often need a recent release.
7. Testing a used or refurbished IRD
A meaningful test uses a real or a test feed with the same parameters as the target service. Check that the receiver locks, that the reported link margin or MER is stable, that the service decodes cleanly, and that all outputs and audio channels carry the signal. On the AI-SAT website the condition is in the product title: NEW O.E.M, EX-DEMO, REFURBISHED or USED. Warranty terms for used equipment are in the refund and returns policy and are confirmed in the written offer.
Short checklist
- Codec, chroma format, bit depth and resolution of the feed
- Input standard, MODCOD and symbol rate
- IP or ASI input, and 2022-7 if two paths are used
- BISS mode or conditional access system
- Outputs and audio requirements
- Licence sheet and software version
- Test result on a feed with matching parameters
Satellite IRD receivers at AI-SAT
AI-SAT has new, refurbished and used IRDs in stock, including the MediaKind RX8200 with full HEVC and DVB-S2X (new) and the Ericsson RX8200 with full HEVC and BISS-CA (refurbished). All units are listed under decoders, IRDs and receivers.
For the licence sheet of a specific unit or a quote, contact AI-SAT at sales@ai-sat.com or via the contact page.